Sunday Racing at it's best

Popped along to the Clubman's meeting at www.maritimeraceway.co.uk today and had a blast, even though I'd been up late to watch the boxing the night before !! (no sleep for ~36 hours)

When I arrived, I was pleased to see a bunch of lads from Sidcup there, all ready to get going in Modified !

We had Terry turn up with his 12th as well though :)

Myself, Alex (putting in a wheel performance while his thumb is on holiday), Charlie, Jordan, Marlon, Vince all doing mod

Pete and Ben doing pro stock.

I was nowhere even close on setup in the first practice session, so had to work on it during the day, and almost got there after changing tyres to Sorex 28 instead of 32's  Thanks to Phil and Des for the setup tips.

Charlie TQ'd mod with 23 laps (the only person to get 23).  It was great to see him having a good result for a change ! Long may it continue !
Alex and myself and Jordan all on 22, so the final was going to be good.

Alex and Jordan tore away at the start and were never seen again, although I tried my damnest to catch them, even getting the car on two wheels round a few corners !

New bling

We're well into the Summer Racing season now, and I've treated myself to a new car. I chose an Xray T2'008 as I have a 007 model, so I know how they work, and a lot of the spares that I have will fit the newer model.
Here's some pictures of the build process, I'm hoping to run it tomorrow at the STCC meeting at West London.


The Box :)

Box Contents

Notice that the chassis comes with the bulkheads already fitted. These have to be removed and the chassis prepared by sanding the edges, then sealing with CA (glue).

A closer shot of the chassis as it comes in the box.


Here's the parts bags in order, ready to begin.


After building bag 1, the suspension arms are fitted.


Bag 2 contains the drivetrain items, such as the Spur gear, pulleys, spool and a Differential. The kit comes with 38 & 16 tooth pulleys, but also 34/20 for lower ratio gearing (2.375 versus 1.77 internal)


After fitting the top deck, shock towers, and camber links.


Close up of the rear hub and camber link.


Close up of the front steering arms and camber links.


Anti roll bar for the rear.


Anti roll bar for the front.


Here's something that's not in the kit, but saves and absolute AGE when building shocks. It's a vacuum pump. Simply fill the shocks with oil, put the lid on, then use the plunger that comes with it to remove the air from the shocks.


Completed front and rear (air-free) shocks :)


Completed bar electronics.

I have built a couple of xray cars, and been working on them for about 18 months now, and I have to say, this kit is really top notch ! It went together very easily, with all the parts fitting first time, and no fettling needed (other than the edges of the chassis).


Let's hope it doesn't fall apart on the track !